Model TH – Torque Limiter Coupling with Conical Clamp

Model TH – Torque Limiter Coupling with Conical Clamp
(7 sizes with rated torque from 5-650 Nm)

Design Description: A hub design for mounting pulleys, sprockets, or gears. Shaft connection is by standard conical clamping hub.

Bore Diameters: Metric or inch bores from 8-56 mm, or 0.315-2.205 inches. Keyways are not available on these models.

Temperature Range: From as low as -30° C to as high as +120° C in standard version (3.6° F to 270° F). High temperature options available.

Sizes: TH-15, TH-30, TH-60, TH-150, TH-200, TH-300, TH-500

Sizing Chart:

TH		15	30	60	150	200	300	500
Adjustment Range available from - to (approx. values) (Nm)	T KN	5-15 12-25 20-40 35-70	5-20 10-30 20-60 50-100	10-30 25-80 50-115	20-70 45-150 80-225	30-90 60-160 140-280 250-400	100-200 150-240 220-440	80-200 200-350 320-650
Adjustment Range available from - to (approx. values) ("F" version)	T KN	7-15	8-20 or 16-30	10-30 20-40 30-60	20-60 40-80 80-150	80-140 or 130-200	120-180 160-300 300-450	50-150 100-300 250-500
Overall Length (mm)	A	40	50	54	58	63	70	84
Overall length ("F" version) (mm)	ᴬF	40	50	54	58	66	73	88
Actuation ring ∅ (mm)	B	55	65	73	92	99	120	135
Actuation ring ∅ ("F" Version) (mm)	ᴮF	62	70	83	98	117	132	155
Clamping fit length (mm)	C	19	22	27.5	32	32	41	41
Inner Diameter from ∅ to ∅ H7 (mm)	D	8-22	12-22	12-29	15-37	20-44	25-56	25-56
Pilot Diameter h7 (mm)	E	40	47	55	68	75	82	90
Bolt-hole Circle Diameter ± 0.2 (mm)	F	47	54	63	78	85	98	110
Flange outside diameter -0.2 (mm)	G	53	63	72	87	98	112	128
Thread	H	6xM4	6xM5	6xM5	6xM6	6xM6	6xM8	6xM8
Distance (mm)	K	8	11	11	12	12	15	21
Distance (mm)	L	27	37	39	41.5	47	51.5	59
Distance ("F" Version) (mm)	ᴸF	27	37	39	41.5	47	51.5	68
Download - 2D DWG (W,D,G)
Download - 2D DWG (F)
Download - 2D PDF (W,D,G)
Download - 2D PDF (F)
Download - 3D STP (W,D,G)		STP	STP	STP	STP	STP	STP	STP
Download - 3D STP (F)		STP	STP	STP	STP	STP	STP	STP
For Full Tech Details Download Catalog