In food packaging applications machinery cleanliness and corrosion resistance are of major importance. But not every application needs stainless steel. Sometimes other options are acceptable. A new prospect contacted us recently looking to upgrade the performance and protection of the spiral bevel gearboxes they were using on their food packaging lines. Tighter motion control was becoming more and more important in their process so they were looking for a box with better consistency in rotary motion and lower backlash. The second thing they were looking for was good gearbox corrosion protection. Since a majority of [...]

I am sure just about everyone would be a little heated after being assigned to a stint in Antarctica. Working conditions are miserable at best. But that's exactly where a Tandler Spiral Bevel Gearbox was slated to go. It's well known that a variety of research and monitoring stations are based in Antarctica. It's a unique environment not found in many places on earth. The conditions are extreme. Many machines and instruments require special characteristics to be able to perform their expected duties. DieQua was presented with a challenge to provide a spiral bevel gearbox [...]

Customers often call saying they need a gearbox but tell us the application is secret. It's understandable that privacy can be a concern. But it's equally important that your supplier really knows what is going on. A customer of ours approached us asking for a spiral bevel gearbox that was to be used in a high-temperature environment. They gave us no other information other than the torque required, that all shafts would be mounted horizontal, the speed would be under 100 rpm, and that it had to operate in a high temp environment of 180 [...]

There are a lot of industrial applications for gear products in harsh environments with not a lot of sources for them. Some of those gearbox applications require operating underwater. I’d say that’s pretty harsh. But it’s something we’ve been able to offer in a number of instances. A customer recently approached us with an engineering request for a gearbox to be used in a wastewater treatment plant. We had done other applications for this customer, but this gearbox had to be able to operate underwater. They were designing an agitation system, which in this [...]

There are a lot of applications where timing the rotation of two elements is required and many of these have one or more of the elements that must physically move position. Examples are coating lines where applicator gap control is necessary, packaging lines where package heights vary, roll formers or die cutters where material thicknesses vary, and machines that require an element to retract for cleaning or set up, among others. We had a customer that recently approached us with such an application. He wanted to drive two rollers with a single drive. One was [...]