Application of the Month
A Quick Connection Improves Efficiency
May, 2012 - View all Application Examples
Short run printing and automated machining requires quick tool changes to achieve customized production in an efficient manner. Two different applications use the same design concept to solve this problem.
In the first application a manufacturer of printing presses was looking for a quick connect device to speed up cylinder changes. With short run printing becoming the norm, print cylinder change over was eating up a lot of production time.
In the past, a transfer gear was installed on the cylinder shaft journal. However, because of gear error, some motion variations were created. The new design was to include a direct drive servo motor to improve position control.
The solution we provided was a modification of the R+W taper fit bellow coupling. This coupling is a two-piece design with a split hub attached to a stainless steel bellow. The second piece has a conical taper segment that pilots into the bellow. With a small amount of axial preload, a zero backlash connection is achieved. The conical element is a molded fiber reinforced polymer material with several driving lobes. This element is then attached to the clamping hub with high strength adhesive. The over all connection provided highly rigid zero backlash torque transmission with misalignment compensation capabilities. With different mating materials, polymer to aluminum, engaging and disengaging the coupling halves was easy and trouble free.
In this instance a modified bellow hub with a shaft extension was required to allow the female coupling half to be bearing mounted in the machine side frame. Because R+W provides a wide variety of customizing options, manufacturing the special design was easily accomplished.
A similar solution was offered to another customer that manufactures machine tools. In this case a standard taper fit coupling satisfied the requirement. The basic design included a rotary table that presented different tools to be driven by a single power source. Each tool had a male taper segment that engaged the single driving female segment. Again, a highly rigid, zero backlash connection was the result, with the addition of connection misalignment compensation.
The R+W series BK5 taper fit coupling can be used in a variety of applications where either a quick connection is needed or where blind mating is required, such as in flanges or areas where bolt tightening access is difficult. It is a unique design that solves a variety of connection challenges.
Torque capacities of this coupling series range from 0.05 Nm, appropriate for encoders or instrumentation, to 1500 Nm for high torque applications. Additional hub to shaft connection styles are offered, based on the needs and desires of the customer.
R+W is a world leader in the design and manufacturing of bellows and elastomer insert shaft couplings. They have the widest range of sizes and design configurations available. Modification and complete customization is a specialty compromising a significant percentage of shipped orders. Their philosophy is to provide a coupling that satisfies the customer's specific needs.
Contact DieQua Corporation for a solution to your next shaft connection challenge. Whether it be a standard product or complete special design, DieQua is dedicated to finding the answer to your problem.
Director of Marketing
Did you know that DieQua publishes a monthly email newsletter that features interesting articles just like this one?
Our newsletter was designed to be a little different than other manufacturer's newsletters that are primarily product centric. While products and services available from DieQua are highlighted, other elements revolve around the personal and professional development of the design engineer.
To receive this newsletter, please visit the registration page and fill out your information.