Tandler Servofoxx Series FS - Right Angle Servo Gearheads

The Tandler precision right angle servo gearhead series FS provides the ultimate in motion control. With hardened and lapped, matched-set spiral bevel gears and a revolutionary motor mount, maximum performance is assured in this single stage solution. 2 stage ratios available in series PSK2FS and series SKP2FS.

Features & Benefits:

Low Backlash

Two levels of backlash optimize and enhance positioning accuracy.

Revolutionary Motor Mount

A flexible motor connection eliminates misalignment and gear deflection.

Corrosion Resistance Option

QPQ Nitriding process provides protection against high moisture environments.

Auxiliary Outputs

Multiple outputs available for driving in several directions.

Cast Iron Housing

Provides superior torsional rigidity over aluminum housings.

Product Selection:

Ratio	Nominal Torque	Peak Torque*	Inertia 10-5 kgm2	Radial Load (N)	Model Number
1:1	10	15	---	---	FS00
1:1	30	45	---	---	FS01
1:1	60	90	---	---	FSA1
1:1	150	225	---	---	FSB1
2:1	20	30	8.5	300	FS00
2:1	52	90	56.3	1100	FS01
2:1	100	180	129.1	2700	FSA1
2:1	200	400	397.5	3700	FSB1
2.5:1	20	37	7.4	300	FS00
2.5:1	52	110	44.8	1100	FS01
2.5:1	100	200	106.1	2700	FSA1
2.5:1	200	400	333.9	3700	FSB1
3:1	20	40	6.7	300	FS00
3:1	52	110	40.8	1100	FS01
3:1	100	200	93.1	2700	FSA1
3:1	200	400	291.1	3700	FSB1
3.5:1	15	35	6.3	300	FS00
3.5:1	42	90	38.2	1100	FS01
3.5:1	80	180	85.1	2700	FSA1
3.5:1	150	300	276.3	3700	FSB1
4:1	15	35	6.0	300	FS00
4:1	42	90	35.7	1100	FS01
4:1	80	180	80.8	2700	FSA1
4:1	150	300	253.4	3700	FSB1
5:1	40	80	33.4	1100	FS01
5:1	75	170	74.8	2700	FSA1
5:1	150	300	237.8	3700	FSB1
6:1	35	70	32.2	1100	FS01
6:1	70	145	71.4	2700	FSA1
6:1	150	290	229.6	3700	FSB1

* Maximum 5% duty cycle. Values are subject to change.